Vaccum evaporator for nickel plating liquid use
NICKEL BACK is a decompression-type vacuum evaporator which recovers water and chemicals through a closed-system nickel plating process.
Features
- A closed-system nickel plating process enables recovery of water/chemicals
- Significant reduction in sludge generation
- Requires minimum space and low cost
- Designed to avoid conventional problems on crystallization
- Equipped with control device to concentrate liquids to the desired concentration
- Provides solution to comply with boron regulations
- Labor-saving in nickel plating process
- Offers easy and safe fully automatic operation
Applications
- Water recovery and concentrated recovery of treatment liquids from various washing processes
- Volume reduction of wastewater
Technical specifications
| Model | W1E-100N | W1E-200N |
|---|---|---|
| Evaporation capacity | 100L/h | 200L/h |
| Dimensions [W×D×H] | 1,080×1,550×2,450mm | 1,380×2,050×2,700mm |
| Steam requirement | 130kg/h | 260kg/h |
| Evaporation temperature | 20RT | 40RT |
| Required cooling capacity (In the case of a cooling tower) |
60 - 65°C | 60 - 65°C |
| Power consumption | 3.3kW | 5.1kW |
| Weight | 750kg | 1,050kg |
| Operating weight | 1,000kg | 1,400kg |
| Operating pressure | -0.08 to -0.085 MPa (-600 to -650 mmHg) |
-0.08 to -0.085 MPa (-600 to -650 mmHg) |
| Main material of wetted parts | SUS316 | SUS316 |
| Control panel | Built into the unit | Built into the unit |