Resource Center System

Ion exchange resin regeneration

Patrone i

Cylinder type ion exchanger

Patrone i-e

Cartridge type miniaturized ion exchanger

ECONOSELFY

Onsite ion exchange regeneration unit

RO+IER

Pure water unit

S.R.B. Ion exchanger

Counterflow regeneration type

Vacuum evaporator

Optimal for concentration recovery of various solutions

NICKEL BACK

Vaccum evaporator for nickel plating liquid use

Rising Thin Film Vacuum Evaporator

Long tube vertical type vaccum evaporator

KANRY®

Evaporator

KANRY®CLEAN

Closed-loop atmospheric evaporator

Recyter

Acid and metal salt separator

ECONITRY

Nitric acid activating bath control unit

Long Tube Vertical (L.T.V) Evaporator Rising Thin Film Vacuum Evaporator

This product evaporates water from dilute solutions to recover solutions at their prescribed concentrations.
Simultaneously with concentration, this product allows the recovery of evaporated water as condensate.
This product is designed to allow concentration of various types of liquids.

Features

  • Applicable to highly foamy (effervescent) liquids
  • Suitable for highly corrosive solutions
  • Allows reliable and easy maintenance of solution concentration
  • Provides simultaneous recovery of water condensate
  • Reduces the load for waste water treatment
  • Fully automatic operation
  • Evaporates liquids at lower temperatures under vacuum condition (to avoid unfavorable changes in the liquid)
  • Energy-saving
  • Compact in design

Rising Thin Film Vacuum Evaporator

Applications

  • Metal and surface treatment industries, chemical industry, textiles, leather and dye industries, steel and metal industries
  • Water recovery and concentrated recovery of treatment liquids from various washing processes
  • Volume reduction of wastewater

Standard Specifications

Model W1V-60 W1V-100 W1V-200
Evaporation capacity - 60L/h - 100L/h - 200L/h
Dimensions [W×D×H] 2.0×1.4×2.9m 2.2×1.6×3.0m 2.2×1.6×3.8m
Steam requirement 78kg/h 130kg/h 260kg/h
Required cooling capacity(In the case of a cooling tower) 10RT 20RT 40RT
Evaporation temperature 55 - 70°C 55 - 70°C 55 - 70°C
Power consumption 3.7kW 4.0kW 6.0kW
Evaporator type LTV (Long Tube Vertical) type evaporator LTV (Long Tube Vertical) type evaporator LTV (Long Tube Vertical) type evaporator
Concentration control Timer set for alternate steps of concentration process and return process Timer set for alternate steps of concentration process and return process Timer set for alternate steps of concentration process and return process
Condenser type Multiple-pipe cylindrical heat exchanger Multiple pipe cylindrical heat exchanger Multiple pipe cylindrical heat exchanger
Vacuum pump Water-seal vacuum pump Water-seal vacuum pump Water-seal vacuum pump
Steam supply on primary/secondary side Saturated steam above 0.25MPa / 0.05MPa (adjusted using pressure-reducing valve) Saturated steam above 0.25MPa / 0.05MPa (adjusted using pressure-reducing valve) Saturated steam above 0.25MPa / 0.05MPa (adjusted using pressure-reducing valve)
Model W1V-300 W1V-500 W1V-750
Evaporation capacity - 300L/h - 500L/h - 750L/h
Dimensions [W×D×H] 2.3×1.7×3.8m 2.6×1.9×4.3m 2.9×2.2×4.4m
Steam requirement 390kg/h 650kg/h 975kg/h
Required cooling capacity(In the case of a cooling tower) 60RT 90RT 125RT
Evaporation temperature 55 - 70°C 55 - 70°C 55 - 70°C
Power consumption 6.5kW 9.0kW 12.0kW
Evaporator type LTV (Long Tube Vertical) type evaporator LTV (Long Tube Vertical) type evaporator LTV (Long Tube Vertical) type evaporator
Concentration control Timer set for alternate steps of concentration process and return process Timer set for alternate steps of concentration process and return process Timer set for alternate steps of concentration process and return process
Condenser type Multiple-pipe cylindrical heat exchanger Multiple pipe cylindrical heat exchanger Multiple pipe cylindrical heat exchanger
Vacuum pump Water-seal vacuum pump Water-seal vacuum pump Water-seal vacuum pump
Steam supply on primary/secondary side Saturated steam above 0.25MPa / 0.05MPa (adjusted using pressure-reducing valve) Saturated steam above 0.25MPa / 0.05MPa (adjusted using pressure-reducing valve) Saturated steam above 0.25MPa / 0.05MPa (adjusted using pressure-reducing valve)
Model W1V-1000
Evaporation capacity - 1,000L/h
Dimensions [W×D×H] 3.2×2.4×4.4m
Steam requirement 1,300kg/h
Required cooling capacity(In the case of a cooling tower) 175RT
Evaporation temperature 55 - 70°C
Power consumption 21.0kW
Evaporator type LTV (Long Tube Vertical) type evaporator
Concentration control Timer set for alternate steps of concentration process and return process
Condenser type Multiple-pipe cylindrical heat exchanger
Vacuum pump Water-seal vacuum pump
Steam supply on primary/secondary side Saturated steam above 0.25MPa / 0.05MPa (adjusted using pressure-reducing valve)

* Request can be made to our company's sales division for more technical details.

Movie Econoback System