HOME
Econoback System
Regeneration simply done on the spot
- Contribute to water recycling
This unit saves water consumption by recycling of water as well as reduces wastewater volume. - Achieve uniform high water purity
This unit offers recycled water with conductivities below 10µS/cm as a result of applying the highly reliable co-current regeneration method. - Regenerate additional ion exchange columns using only one regeneration unit
Because a common regeneration unit is used, regeneration can be done easily even for several ion exchange units. - Expand recycling possibilities even for short service cycles
With this unit, trial introduction of ion exchange equipment becomes possible even in cases where adoption of the resupply-redemption regeneration method (Sanshin's Resource Center System) is difficult.
- The quality of treated water provided is based on company experimental results and is not a guaranteed value.
- If higher purity is needed, our company also manufactures a mixed bed ion exchanger (regeneration done at Sanshin's Resource Center).
- Please use the appropriate treatment for wastewater from regeneration.
Features
- Provides various combination to suit actual conditions:
Using this unit, it is possible to select the best ion exchange resin combination and their capacities based on recycled water requirements. - Requires minimal space and allows easy installation even in limited space:
Compared to our previous units, about 30% lesser space is needed and about 20% lighter in weight is attained. Because of its easy onsite electrical and piping installation, recycling of water can initiated at once. - Easy to use regeneration unit:
This unit requires effortless operation of the valves, without the need to reconnect hose during the regeneration cycle. Moreover, using automatic valves, we have also included in our product line-up a fully-automatic regeneration unit.
Dimensions
W1XC-2PH / W1XC-3PH [Regeneration Unit]
Specifications
| Model | W1XC-2PH / W1XC-3PH | |
|---|---|---|
| Type of Operation during Regeneration | Manually-operated (Valves) | |
| Number of Synchronous Columns Regenerated | 2 Columns / 3 Columns | |
| Water Supply Inlet Pipe Size | 15 A | |
| Wastewater Outlet Pipe Size | 20 A | |
| Motor (50/60Hz) | AC200V 0.5kw | |
| Dimensions | 2 Columns W x D x H |
890 mm x 900 mm x 1,640 mm |
| 3 Columns W x D x H |
940 mm x 900 mm x 1,900 mm | |
* Accessories: Conductivity meter, Water tank, Control panel, Hose-connectors for Ion Exchange Columns
W1XC-2PA / W1XC-3PA [Regeneration Unit]
Specifications
| Model | W1XC-2PA / W1XC-3PA | |
|---|---|---|
| Type of Operation during Regeneration | Automatic | |
| Number of Synchronous Columns Regenerated | 2 Columns / 3 Columns | |
| Water Supply Inlet Pipe Size | 15 A | |
| Wastewater Outlet Pipe Size | 20 A | |
| Motor (50/60Hz) | AC200V 0.6kw | |
| Dimensions | 2 Columns W x D x H |
890 mm x 1,120 mm x 1,815 mm |
| 3 Columns W x D x H |
940 mm x 1,120 mm x 2,000 mm | |
* Accessories: Conductivity meter, Water tank, Control panel, Hose-connectors for Ion Exchange Columns
W1P-2013LR / W1P-3013LR [Ion Exchange Service Flow Unit]
Specifications
| Model | W1P-2013LR / W1P-3013LR | |
|---|---|---|
| Number of Ion Exchange Columns | 2 Columns / 3 Columns | |
| Resin Volume (L Column) | 12.5 | |
| Maximum Flowrate (L/hr) | 370 ℓ/hr | |
| Cartridge Filter | 10 inch x 1 | |
| Inlet & Outlet Pipe Size | 20 A | |
| Motor (50/60Hz) | AC200V 180/216W | |
| Dimensions | 2 Columns W x D x H |
1,000 mm x 550 mm x 1,070 mm |
| 3 Columns W x D x H |
1,300 mm x 550 mm x 1,070 mm | |
* Material of Ion Exchange Column: FRP, Materials of Cartridge Filter: PPGF/PVC
* Accessories: Conductivity meter, Pump switch, Hose-connectors for Ion Exchange Columns
* Activated carbon columns are also available as an option.
W1P-2025LR / W1P-3025LR [Ion Exchange Service Flow Unit]
Specifications
| Model | W1P-2025LR / W1P-3025LR | |
|---|---|---|
| Number of Ion Exchange Columns | 2 Columns / 3 Columns | |
| Resin Volume (L Column) | 25 | |
| Maximum Flowrate (L/hr) | 750 ℓ/hr | |
| Cartridge Filter | 20 inch x 1 | |
| Inlet & Outlet Pipe Size | 20 A | |
| Motor (50/60Hz) | AC200V 180/216W | |
| Dimensions | 2 Columns W x D x H |
1,140 mm x 550 mm x 1,070 mm |
| 3 Columns W x D x H |
1,500 mm x 550 mm x 1,070 mm | |
* Material of Ion Exchange Column: FRP, Materials of Cartridge Filter: PPGF/PVC
* Accessories: Conductivity meter, Pump switch, Hose-connectors for Ion Exchange Columns
* Activated carbon columns are also available as an option.
W1P-205LR / W1P-305LR [Ion Exchange Service Flow Unit]
Specifications
| Model | W1P-205LR / W1P-305LR | |
|---|---|---|
| Number of Ion Exchange Columns | 2 Columns / 3 Columns | |
| Resin Volume (L Column) | 50 | |
| Maximum Flowrate (L/hr) | 1500 ℓ/hr | |
| Cartridge Filter | 30 inch x 1 | |
| Inlet & Outlet Pipe Size | 25 A | |
| Motor (50/60Hz) | AC200V 180/216W | |
| Dimensions | 2 Columns W x D x H |
1,230 mm x 550 mm x 1,320 mm |
| 3 Columns W x D x H |
1,630 mm x 550 mm x 1,320 mm | |
* Material of Ion Exchange Column: FRP, Materials of Cartridge Filter: PPGF/PVC
* Accessories: Conductivity meter, Pump switch, Hose-connectors for Ion Exchange Columns
* Activated carbon columns are also available as an option.
W1P-2075LR / W1P-3075LR [Ion Exchange Service Flow Unit]
Specifications
| Model | W1P-2075LR / W1P-3075LR | |
|---|---|---|
| Number of Ion Exchange Columns | 2 Columns / 3 Columns | |
| Resin Volume (L Column) | 75 | |
| Maximum Flowrate (L/hr) | 2000 ℓ/hr | |
| Cartridge Filter | 10 inch x 4 | |
| Inlet & Outlet Pipe Size | 25 A | |
| Motor (50/60Hz) | AC200V 750W | |
| Dimensions | 2 Columns W x D x H |
1,630 mm x 670 mm x 1,390 mm |
| 3 Columns W x D x H |
2,130 mm x 670 mm x 1,390 mm | |
* Material of Ion Exchange Column: FRP, Materials of Cartridge Filter: PPGF/PVC
* Accessories: Conductivity meter, Pump switch, Hose-connectors for Ion Exchange Columns
* Activated carbon columns are also available as an option.
PDF Catalog download
 |
 |
Adove Reader is required to view PDF files. |
